Roundness and straightness measurement of ceramic beam ducts for the 3GeV-synchrotron of Japan-proton accelerator research complex

Nishizawa, Daiji*; Kinsho, Michikazu; Kanazawa, Kenichiro; Ogiwara, Norio; Saito, Yoshio*; Kubo, Tomio*; Sato, Yoshihiro*

Shinku, 47(4), p.339 - 343, 2004/02

https://doi.org/10.3131/jvsj.47.339

Large aperture cylindrical beam ducts consisting of alumina ceramics will be used for the first time in the 3GeV-synchrotron of High Intensity Proton Accelerator Facility. It is necessary to evaluate roundness and straightness of ceramic ducts because we have to compensate contact area of the connected beam duct large as well as we have to compensate large enough beam aperture. We developed an apparatus of measuring roundness and straightness, and we completed data analysis method as well as measuring method. Then we are measuring and evaluating roundness and straightness of ceramic beam ducts. Now, we have newly made an ellipse ceramic duct for the 3GeV-synchrotron BM. This duct has ellipse cross-sections to satisfy with larger aperture that the beam dynamics requires. In this conference, we are going to present taken data and findings regarding form accuracy including roundness and straightness of the ellipse ceramic duct.

Preliminary joining experiment of alumina pipes by using ceramics sleeve

Abe, Tetsuya; Hiroki, Seiji; Tanzawa, Sadamitsu; Kosaku, Yasuo; Takauchi, Hisao*; Yamakawa, Akira*

JAERI-Research 2001-029, 13 Pages, 2001/05

JAERI-Research-2001-029.pdf:3.39MB

no abstracts in English

Denitration characteristics of aqueous metal nitrate solution by microwave heating with carbon nanotube-containing alumina composite ceramic jacket

Segawa, Tomoomi; Kawaguchi, Koichi; Ishii, Katsunori; Nagakawa, Genta*; Tamaru, Ayaka*; Fukasawa, Tomonori*; Ishigami, Toru*; Fukui, Kunihiro*

no journal, , 

Microwave heating in combination with an external heating source has been used to improve powder properties by compensating for heat transfer losses. However, the external heating source in the microwave irradiation field may degrade the heating elements. A hybrid heating method has been developed to use composite ceramic jacket prepared by adding carbon nanotube (CNT) to alumina. To evaluate the effect of CNT-containing alumina composite ceramic jacket (CNT jacket), experiments were implemented. In both copper nitrate solution and nickel nitrate solution, the time to reach the maximum temperature was earlier when the CNT jacket was used than when the alumina jacket was used. The temperature of the nickel nitrate solution was kept at the maximum temperature when the CNT jacket was used, while the temperature tended to decrease after reaching to 280C when the alumina jacket was used. The hybrid heating method using the CNT jacket can obtain metal oxides.